|
Item
|
Description
|
Product
Photo
|
Price
|
| Cragar
Four Port Cylinder Head for Ford B Engines |
In
development for five years, our cylinder head is designed with
performance and horsepower in mind! Developed for street use,
rather than racing, its 8:1 compression ratio runs smoothly on
regular fuel. Heads arrive complete and ready to install.
Views show head complete with water
pump choices (original Cragar type on left ... cast goose neck
and thermostat on right).
It comes with 8 tappets, 8 push
rods and distributor drive shaft.
Our valve train is also unique to
this head only with needle bearing and roller tip rocker arms,
2:1 ratio and stud mounted.
Cast from high quality 355-T6 aluminum
alloy, heads feature replaceable precision bronze valve guides
that are easily repaired and 2.050 inch intake and 1.600 inch
exhaust stainless valves. Heads accept 1/2 inch 14mm spark plugs.
|
  |
$4000.00* |
| detail |
Intake
ports are 1 5/8 inch, O-ring sealed. |
 |
|
| detail |
Water
pumps are available in two styles: original Cragar style (left)
and cast goose neck (right). |
  |
|
| detail |
A
close-up of the Cragar style water pump illustrates five sealed
roller bearings, ceramic seal and a four fin brass impeller. |
 |
|
| detail |
Roller
tip rocker arms. |
 |
|
| detail |
2:1
ratio roller rocker arm with poly lock. |
 |
|
| detail |
Log
style intake manifold for Two Stromberg 97's. |
 |
|
| detail |
Copper
sandwich type head gasket, 14 Grade 8, 7/16 head studs, nuts and
hard steel washers. |
 |
|
| OHV
Side Valve Chamber Cover for Model B Blocks |
Model
B overhead valve side cover cast of premium aluminum alloy. |
 |
$75.00* |
| Crower
Rods |
Bulletproof
rods for the Model B engine that accept Triumph TR-4 bearings. |
 |
$1100.00* |
| Crankshaft
Counterweights |
Set
of four crankshaft counterweights, made just like Ford made them.
Sweat them on, no welding needed. Machining required to fit Model
A or B cranks. |
 |
$250.00*
(set of 4) |
| High
Volume Oil Pump |
Pump
uses larger-than-stock gears, has an adjustable relief valve and
fits the stock pan.
Stock splash tray must be trimmed
for clearance and have a drilled crank for full pressure. Cannot
use original mechanical fuel pump. |
 |
$350.00* |
| Oil
Filter System |
System
includes all lines, fittings, adapter and filter to work with our
oil pump. Also includes choice of side cover, either OHV or stock
head. |
 |
$200.00* |
| Rutherford
two-piece Aluminum Oil Pan |
For
Model B engine blocks only. Requires use of a Model A flywheel housing.
Nine inches deep, not designed for use
with stock oil pumps.
(Additional views available on enlargement.) |
<
|
$475.00* |
