part detail
part detail
part detail
K.R. Wilson Engine Stand with Tool Tray
Complete and ready to use.
$2250.00*
part detail
Engine Stand Tool Tray
Engine stand No. 35B Tool Tray, made of aluminum alloy and ready to install, does not come painted.
$165.00*
part detail
Model A Ford K R Wilson transmission adaptor A-416
KRW A-416 adaptor comes with the knotch plate, wing nut and the T nut the holds the trans case to the adaptor. Does not come painted
$475.00*
$375.00*
W/O knotch
plate & wing nut
part detail
Does not come painted
part detail
Engine Stand Base
Engine stand roll-around base, made of 356 T-6 aluminum alloy, comes with wheels, axles and casters. Ready to mount your No. 35 post too. Does not come panted.
$950.00*
Model T & Model A/B Engine Adaptor
Model T and Model A/B engine adaptor No. 331. This bracket is complete with knotch plate and wing nut and made of cast steel. Ready to install.
$485.00*
$385.00*(less wing nut ,knotch plate)
part detail
Ford flat head V8 engine stand adaptor
KRW V-40 adaptor, comes with knotch plate and wing nut made of cast steel. Ready to install. Does not come painted.
$485.00*
$385.00*(less wing nut & knotch plate)
part detail
Does not come panted.
part detail
Does not come painted.
Engine Adaptor Wing Nut
Engine adaptor wing nut, made of cast steel ready to install, does not come painted
$80.00
Engine Adaptor Knotch Plate
Engine Adaptor Knotch Plate, made of cast steel, ready to install. Does not come painted
8 position Knotch plate as shown---$125.00
16 position Knotch plate--$140.00
$125.00*
part detail
Engine Stand Post
Engine stand post No. 35. Fits the No. 744 base. Made of 356 T-6 aluminum alloy. Comes ready to mount to base and accept any KRW engine stand bracket.
$950.00*
part detail